DuraSeal Renovator

DESCRIPTION
     DuraSeal® Renovator Cleaner and Reconditioner is a special balance of solvent and resin that cleans and reseals hardwood floors previously finished with DuraSeal® Penetrating Gym Finish, DuraSeal® Penetrating Finish or DuraSeal® Dura Finish® Liquid Floor Wax. DuraSeal® Renovator® Cleaner and Reconditioner can also be used on terrazzo, concrete or unglazed terra cotta tile.

DIRECTIONS

1. Using a brush, lambs wool applicator or sprayer, apply a coat of DuraSeal® Renovator Cleaner and Reconditioner at a coverage rate of 900 square feet per gallon to an area of approximately 100 square feet.
2. Allow 5 minutes for DuraSeal® Renovator Cleaner and Reconditioner to act before removing excess with steel wool.
3. Scrub floor with #3 steel wool until DuraSeal® Renovator Cleaner and Reconditioner and dirt have been removed from the floor and the surface is dry to the touch. 
   NOTE: Periodic changing of the steel wool is essential to ensure proper removal of dirt and DuraSeal®Renovator Cleaner and Reconditioner.
4. Allow to dry at least 4 hours. 
   NOTE: Drying time will be increased by hiqh humidity, low temperature or inadequate removal of excess material.
5. If desired, apply a finish coat of DuraSeal® Penetrating Finish or DuraSeal® Paste Wax.

NOTE: 
      DuraSeal® Renovator Cleaner and Reconditioner is neutral in color. For colored floors mix 4 parts DuraSeal® Renovator Cleaner and Reconditioner with one part DuraSeal® Penetrating Finish color of your choice. DuraSeal® Renovator Cleaner and Reconditioner does not require a finish coat.

DRY TIME
     Approximately 4 hours. NOTE: Drying time will be increased by high humidity, low temperature, lack of air movement or inadequate removal of excess material.

COVERAGE
     900 square feet per gallon.

CLEAN-UP
      Clean equipment with paint thinner, turpentine or mineral spirits.

SOLVENT
    c  Non-photochemically reactive.

---